Martin Audio W8C
€ 40,00
The award-winning Wavefront W8C is lightweight and compact. It can be rigged quickly to deliver outstanding power and performance in smaller configurations than was previously possible with other loudspeakers. Audience experience is enhanced by true musicality, warmth and intelligibility – even at high SPL’s. Ground-breaking three-way technology marries a low-mid horn-loaded 12″ (300mm) cone drive unit with a unique combination of 6.5″ (165mm) high-mid driver loaded by toroidal phase plug and horn plus a 1″ (25mm) exit HF device, optimised for very high frequencies. The result – a remarkably clean, transparent sound, far lower distortion and increased overall output, without pushing any element to the limit. The W8C confirms the trend for increasingly compact systems. A typical arena system flown 6 cabinets wide and 3-4 deep is both lightweight and pleasing to the eye of the production manager. Using the MAN flying system has the safety advantage that inter-cabinet connections place no load on the cabinets and, being external, can be load certified and inspected independently.
Rental period
Could not check availability
Description
The loudspeaker system shall be of the three-way type with switchable active/passive HF. The low-mid section shall consist of one 12″ (300mm) cone transducer mounted on a horn flare with a precision moulded waveguide. The high-mid section shall consist of a 6.5″ (165mm) cone driver mounted on a constant directivity horn flare with integral toroidal waveguide. The high frequency section shall consist of a 1″ (25mm) exit HF compression driver mounted on a constant directivity horn which shall be internally protected for signals below its intended passband by a power and frequency matching network. The enclosure shall be of the heavily braced multi-laminate trapezoidal plywood type. Performance of the loudspeaker system with its electronic controller shall meet or exceed the following criteria: Frequency response measured 1 metre on axis shall be 120Hz-18kHz ±3dB. High frequency dispersion at -6dB points shall be 55˚H x 30˚V. Power handling shall be 300W AES, 1200W peak Lowmid, 150W AES, 600W peak High-mid /(HF), 60W AES, 240W peak HF. Rated impedance shall be 8 ohms Low-mid, 16 ohms High-mid /(High-mid HF), 16 ohms HF. Maximum SPL measured at 1 metre on axis shall be 130dB continuous, 136dB peak. Dimensions (W) 556mm x (H) 799mm x (D) 911mm (21.9ins x 31.5ins x 35.9ins). Weight 71kg (156.5lbs).
Reviews
There are no reviews yet.